            Total Phase Beagle 480 Firmware Upgrade Utility
            -----------------------------------------------

Contents
--------
bg480-update-windows.exe  - Upgrade utility for Windows
bg480-update-linux        - Upgrade utility for Linux
bg480-update-darwin       - Upgrade utility for Darwin / Mac OS X


Instructions
------------

1) Download and install the Total Phase USB driver (if you have not
   done so already): http://www.totalphase.com/products/beagle_usb480/

2) Connect the USB analysis port of the Beagle 480 to the PC.

3) Run the bg480-update utility.

 * On Windows, double-click the utility.
 * On Linux/Mac OS X, run the utility in a terminal from its directory.

4) At the command prompt, press 'p' to program the device with the
   latest firmware.

5) The update utility will first erase the memory on the analyzer,
   then write the new firmware, and finally verify that the firmware was
   written correctly.

6) Power cycle the device by disconnecting the analysis port from
   the PC and reconnecting it.

NOTE: If you see any errors when running the utility, try to
      disconnect the Beagle 480 from the PC, reconnect it, and run the
      utility again.

