                       Promira Firmware Update
                       -----------------------

Introduction
------------
This package contains the firmwware update for the Promira Serial Platform.
Loading the PMU package will update the firmware, while leaving intact
existing configuration and licenses.


Promira Admin Interface
-----------------------
The Promira with v2.00 and later firmware features a web-based
interface for obtaining version and license information, configuring
network settings, and upgrading the system firmware.

This is accessed using a web browser by connecting to the Promira device's
USB IP address with HTTP on port 81:  http://PROMIRA_IPADDR:81/

The Promira device's IP address can be determined by one of these methods:

 - From the "Connect" dialog of Control Center, Data Center, or Flash
   Center software.

 - Using the Python or C detect programs from the API package.

 - Manually, by checking your computer's network settings.  Find the
   Promira device's virtual network adapter and locate the IP address
   assigned for this interface of your computer.  The Promira device's
   IP address will be the computer's IP address decremented by one.

   For example, if the virtual network adapter IP address is 10.1.2.3,
   the Promira device is at 10.1.2.2 and the Admin Interface address
   is at this location:  http://10.1.2.2:81/


Update Process - From v2.00 and Later
-------------------------------------
Performing the firmware or license update from v2.00 onward is done
via the Promira device's Admin Interface using the following steps:

1) Open the Promira Admin Interface page.

2) Scroll to the "Firmware / License Update" section.

3) Click the "Choose File" button.

4) Select the appropriate the firmware or license PMU file and click OK.

5) Click the Upload button.

The device will automatically reboot when the update is done.


Update Process - From Versions Prior to v2.00
---------------------------------------------
1) Using the Control Center application, connect to the device.

2) From the Adapter menu, choose "Upgrade License/Firmware" and
   confirm the dialog box.

   The Control Center Serial software initializes and reboots the
   Promira for firmware upgrade.  This can take up to 15 seconds.
   Upon reboot, the device will appear as a USB drive on the PC.

   Note: If Windows prompts to scan and fix the drive, choose to let
   it scan and fix the drive.

3) Using your file manager interface, copy the PMU file to the USB drive.

4) Important: Perform a Safe Eject operation on this drive.

5) Wait 10 seconds.

6) Unplug and re-plug the Promira to cycle the power.

It will take a few seconds for the device to complete the update.


Additional Information
----------------------
Documentation, updates, and related products are available at:
https://www.totalphase.com/
